300W Vehicle Audio Bass Amplifier - BANDA 1200.42OHMGREEN

The Banda 1200 Watt 4 Channel 2 Ohm Car Amplifier - model 1200.41OHMGREEN @ 1 Ohm - is a powerful car audio amplifier that should only be used with an impedance load that meets the specifications of the amplifier. Using a lower impedance load can cause damage to the equipment. To ensure better electrical contact, it is recommended to use wire solder when tinning the cable ends. Loose electrical connections can lead to malfunctions, overheating, and even fires.

For optimal performance, the GND connection should be as short as possible, using an appropriate wire terminal securely connected to a clean, unpainted spot on the car chassis. The amplifier features a Crossover with selector keys for adjusting the settings to LOW, FLAT, or HIGH.

This Class D vehicle audio amp has a Total PWR of 14.4 @ 2 Ohms: 4x400 WRMS, Total PWR of 14.4 @ 4 Ohms: 4x260 WRMS, and Total PWR of 14.4 Bridged @ 2-4 Ohms: 2x800 WRMS. Additionally, the Total Power at 12.6 @ 2 Ohms is 4x300 WRMS. The efficiency of the amplifier is 92% at 4 Ohms and 80% at 2 Ohms.

The MONO BASS AMPLIFIER has multiple indicators including a Blue LED for source and power, Red LED for output distortion (clipping), a Constant indicator for shorting and thermal protection, and a Yellow LED for below specified voltage (flashing).

The Power Amplifier features RCA connectors for a secure connection between the amplifier and speakers, ensuring distortion-free sound. Other technical specifications include a recommended fuse of 80A, an input voltage range of 9 to 15V, an input impedance of 100K Ohms, THD + Noise of <1%, input sensitivity from 160mV to 4V, and a signal to noise ratio of 86dB.

The power requirements include a current at rest of 1.5A, an average current draw of 150A (Sinusoidal) and 75A (Music), a power wire gauge of 16mm/5 AWG, and a speaker wire gauge of 2x2.5mm/2x14 AWG. The amplifier has dimensions of 2.2” x 8.4” x 9.7” inches.

product information: