High-Powered Mono Bass Amplifier with Subsonic and Low Pass Filters - BANDA 2K1OHMGREEN

Introducing the BANDA 2K1OHMGREEN car audio amplifier, boasting a whopping 2600 Watts maximum power output at 1 Ohm, complete with Bass Boost, High Pass Filter, and Low Pass Filter for ultimate sound customization. It is crucial to use 21mm/4 AWG power cables for both the GND and +12Vdc connections to ensure optimal performance. Avoid using an impedance load lower than the amplifier's specifications to prevent damage to your equipment.

For the best electrical contact, use wire solder to tin the cable ends. Loose electrical connections can lead to malfunctions, overheating, and even fire hazards. Keep the GND connection as short as possible, securely fastening it to a clean, paint-free spot on the car chassis with an appropriate wire terminal. If utilizing multiple amplifiers, ensure each one has its dedicated wiring setup.

In the event of using a power supply to operate the amplifier, ensure it can accommodate 2 x 0 AWG power cables for both GND and +12Vdc, supplying at least the amplifier's maximum current value and a maximum output variation (Vripple) of up to 10%. The Power Supply operates as a Class D vehicle amplifier, delivering 2600 WRMS at 14.4v and 2000 WRMS at 2 Ohms, with an efficiency of 77% at 2 Ohms and 65% at 1 Ohm.

Incorporating Mono Bass Amplifier Indicators such as a Blue LED for the power status, Red LED for output distortion (clipping), and a Yellow LED for low voltage battery alerts. Keep an eye out for the constant indicators for output short circuit and blown fuse detection.

The power output and impedance specifications include an Input Voltage range of 9 to 15V, Input Impedance of 100K Ohms, and a THD + Noise level of less than 0.10%. With an Input Sensitivity of 160mV – 4V and a Signal to Noise Ratio of 70dB, this amplifier promises top-notch sound quality.

Designed with high-quality RCA connectors for secure connections, this Power Amplifier ensures distortion-free sound. Additional technical specs include a recommended 100A fuse, 2A current at rest, and average current draws of 220A (sinusoidal) and 110A (music). The power wire gauge is 21mm/4 AWG, while the speaker wire gauge is 2x4mm/2x11 AWG. The amplifier dimensions measure 9.6’’ x 8.2’’ x 2.1’’ for a compact yet powerful sound system upgrade.

product information: